Sunday, May 22, 2011

Range Time

Well, after careful measurements it is obvious that this gun has  a tight, but standard chamber.  Even one ten thousands over will cause the round to hang up.  Fortunately the Lee Factory Crimp Die will bring the rounds into spec without much trouble.  I"ve backed the crimp part of the Die all the way out.  Because I shoot mostly lead rounds, crimps can be very problematic as they will have a tendency to undersize the round.  This is just to take the 'Glock' bulge out of the case.

In 200 rounds I had:
1.  Squib load.  Very embarrassing.
 a.  Two failure to enter battery.  A light tap solved the problem.  These were on rounds that I didn't factory crimp.
2.  Three failures to lock back using magazine number three.  Hopefully it will settle out.
3.  Awesome little one inch groups at 15 yard.  On a couple, all five rounds were touching.  And this load is just my generic 135pf USPSA load.
4.  Rapid fire kept everything in the 8 ring without any trouble at all.  The gun comes back on target quickly and without any drama.  It appears that I'm pushing to the left a touch in rapid fire.  Probably because this trigger is so much closer to the grip than I'm used to.  It's a trigger to die for and I won't change a thing.

Other thoughts.
I've been shooting enough iron sight rifle stuff to be irritated with the "combat sight picture."  For those of you who haven't heard that term, with a defensive handgun you simply place the front sight right where you want the hole and if you've gotten everything else right, that's where the hole will be.  I really prefer the six o'clock sight picture, where you place the target right on top of the front sight.  When shooting for defense it's much easier to cover the target, but when checking loads, or trying to get feedback on fundamentals, a six o'clock hold is better.  I may get a taller rear, or adjustable rear to make it shoot the way I want.  I wanted to get some Warren Tatical sights anyway.  :)

Normally I'd require  a lot more rounds down range before a gun goes in the carry holster.  But normally a gun doesn't shoot this well right out of the box.  This Sig is everything I wanted it to be, but I didn't expect it to be this good, this fast.

Saturday, May 21, 2011

Possible Problem

The new Sig P226 feels like it was built for my hands.  I seem to shoot Sigs better than any other gun I've tried.  This one is no exception.  Unlike my P239 which seems to love any bullet you happen to feed it.  This one is young enough to be a picky eater.  Picky enough that about 10% of my reloads won't even chamber.  Hopefully the super tight chamber will loosen up as the Nitron coating inside the barrel gets worn down.

END OF THE WORLD!

Good thing I didn't run up my credit card.  Looks like I'd have to pay it off.  No end of the world today folks, go back to your lives.....

Friday, May 20, 2011

New Gun

Sig P226.   Born May 11th, 2011.  Brought home May 19th, /2011.  No range time yet.  Hopefully sometime today.  Bought it at my favorite LGS.  Beartooth Cash & Gun.  A great supporter of the local shooting sports!  Price was the same as the internet, but I didn't have to pay shipping on top.

Thursday, May 19, 2011

SD9 Update

I've got about 3000 rounds through my SD9 at this point and it's time for it to move on.

This has been a pretty good gun.  I had some problems with the sights loosing up with I solved with locktite.  But it's just not quite right.  So I found it a new home.  James, I hope it treats you good.


Things I liked about this gun:
1.  Striker fired.  Consistent trigger pull from first to last, excellent feedback on the reset.  Perhaps a little too much over travel.
2.  Fits M&P Holsters.  Going with this gun is a Serpa, a custom leather pancake, and a MTAC.  All fit beautifully.
3.  Wonderful grip.  I have small hands and this gun was perfect.  16+1 in a grip that rivals a 1911.
4.  Light weight.  The polymer design made all day carry a dream

Things I didn't like:
1.  Light weight.  With a full magazine the gun came back on target fast, by the end of the string it was noticeably harder to control.
2.  The sights coming loose.  And eventually the front dot lost it's radioactive goodness.  S&W made it right and it went to it's new home with a brand new front post.
3.  Trigger reset, just a little long.  The M&P has a shorter reset, but it's almost impossible to feel.


What now?  Well, I've got a new gun to pick up.  That's a story for another day.

Sunday, March 20, 2011

Pet Peeve

There is no such thing as 'Common Sense.'  Common sense is stuff you learn from a lifetime of experience and as everybody has different experiences throughout their life, there is nothing common about it at all.  ie. most people know not to stick a fork in an outlet, but I've seen a kid do it and somebody that comes from a culture with no electricity isn't going to know it.  Don't depend on common sense to get you through life, let alone an emergency.  Plan on running into things that you know nothing about and proceed with caution.

That is all.

Sunday, January 16, 2011

Good Day

Hung out with a friend today helping him set up his Dillion 650 press.  It's different from my Hornady.  I like the case feeder, their primer mech is superior, the indexing is perfect.  The powder measure sucks, I don't like the separate seat and crimp operation.  It's a wash.  Both units have nice features, both will run fast enough to pay for themselves.  It's been said before, choose red or blue and pick 'em.

We were building 45 ACP rounds today.  I think we should seat them a little longer and add some powder.  We had some pretty extreme velocity fluctuations and the seal wasn't as tight as it could be.  I did get to shoot a Glock 21 today.  I got to be the guinea pig, the load was mild and I had no worries.  It was a Gen 2 model that feels like a 2x4.  It's hard to make a double stack .45 that I can fit my hand around, Glock fails, even with the new short frame models.

With my 9mm I had an awesome day.  The lower recoil meant that I hardly noticed it after running through fifty full house .45 loads.  Today was a real breakthrough.  I could tell that my sights are a little off.  POI is to the right.  At 25 yards, I had to hold about 4 inches left to hit the center of the target and I made a nice little cluster right in the middle of the target.  When I had a miss, I called it even before my sights came back on target.  I'm super happy with how I shot today and super excited to be adding .45 ACP to my reloading abilities.